|
00-06 Toyota Tundra |
|
|
Radio Removal |
 |
Layout of radio to be removed start by removing the climate control knobs |
|||
 |
remove 3 exposed Phillips screws | |||
 |
push the heater vents up and remove 2 exposed Phillips screws | |||
 |
use hands or panel removal tool to pull off the dash piece | |||
 |
remove dash and unplug it | |||
 |
location of clips on the dash piece | |||
 |
remove 4 10mm bolts from the sides of the radio bracket | |||
 |
remove 4 screws from each side of the bracket if you wish to reuse them | |||